Ha introducido un valor en los campos resaltados a continuación que contiene caracteres no válidos. Revise su selección utilizando sólo caracteres válidos.
Es posible que el producto no corresponda exactamente con su búsqueda
Ya compró este producto antes.
Ver en Historial de pedidos
135A
Accesorio de Pruebas, Bobina Helmholtz RF, 30 MHz, 50 ohm, Sondas EMC Beehive 100A, 100B, 100C
La imagen solo tiene fines ilustrativos. Consulte la descripción del producto.
- Fabricante:
- BEEHIVE ELECTRONICS BEEHIVE ELECTRONICS
- No. Parte Fabricante:
- 135A
- No. Parte Newark
- 33AC1408
- Hoja de datos técnicos:
- 135A Datasheet
Información del producto
¿Quieres ver productos similares? Selecciona tus atributos requeridos a continuación y haz clic en el botón ×
- :
- Bobina Helmholtz RF
- :
- 30MHz
- :
- 50ohm
- :
- -
- :
- Sondas EMC Beehive 100A, 100B, 100C
- :
- -
Documentos técnicos (2)
Resumen del producto
The 135A from Beehive Electronics is an RF helmholtz coil. It generates a controlled, well defined magnetic field between its coils. This magnetic field can be used to calibrate magnetic field probes or to generate a controlled field for testing other devices. The 135A is optimized for high frequency performance and is usable up to 30MHz. It includes fixturing to precisely hold the Beehive Electronics 100A, 100B and 100C EMC probes so that the user may measure the sensitivity of the probes and calculate their calibration factors. Mounting holes are provided to allow the user to fixture other devices inside the helmholtz coil. The gain is 1.45* 10^-5 tesla/ampere (expressed as flux density/current), 11.54m^-1 (expressed as magnetic field strength/current). This coil has loop diameter of 4.88inch (123.9mm), loop spacing of 2.44” (62mm) and overall dimensions 2.5” (63mm) x 6” (152mm) x 6” (152mm) (H x W x D).
- Calibrate magnetic fields sensors/subject test samples to controlled, repeatable magnetic fields
- Wide bandwidth allows operation up to 30MHz
- Includes fixtures for use in calibration 100A, 100B, 100C probes
- Mounting features for user supplied fixtures allow calibration or measurement of many devices
- Designed for use with standard 50 ohm signal sources
- Maximum input current is 0.5A peak, 0.35A rms
- Maximum input voltage is 240V peak, 170V rms
- Inductance is 1.25µH ±10%, test frequency 1MHz
- BNC female connector, 0°C to 55°C environmental operating temperature
0 En stock
No cancelable / No retornable
$2,904.66
El precio no está disponible. Por favor Contáctese con Servicio al cliente.
- Precio para:
- Each
Múltiple: 1 Mínimo: 1
| Cantidad | Precio en USD | Su Precio en USD |
|---|---|---|
| 1+ | $2,904.66 |
Precio promocional
Precio de contrato
Precio exclusivo de la web
Precio de contrato exclusivo de la web
|
El precio no está disponible. Por favor Contáctese con Servicio al cliente.
Precio total:
Precio total: ( )
Precio total: --
Herramienta de filtro