Print Page
FT232RNL-REEL
Interface Bridges, USB to UART, 3.3 V, 5.25 V, SSOP, 28 Pins, -40 °C
Image is for illustrative purposes only. Please refer to product description.
Packaging Options
881 In Stock
Need more?
Same day shipping
Order before 9pm EST standard shipping
| Quantity | Price |
|---|---|
| 1+ | $8.100 |
| 10+ | $7.480 |
| 25+ | $7.350 |
| 50+ | $7.220 |
| 100+ | $6.940 |
| 250+ | $6.400 |
| 500+ | $5.840 |
Price for:Each (Supplied on Cut Tape)
Minimum: 1
Multiple: 1
$8.10
Enter Your Part No/Line Note
Added to your Order Confirmation, Invoice, and Dispatch note for this order only.
This number will be added to the Order Confirmation, Invoice, Dispatch note, Web confirmation Email and Product Label.
Product Information
ManufacturerFTDI
Manufacturer Part NoFT232RNL-REEL
Newark Part No.57AK3131
Technical Datasheet
Bridge TypeUSB to UART
Supply Voltage Min3.3V
Interface Case StyleSSOP
Supply Voltage Max5.25V
IC Case / PackageSSOP
No. of Pins28Pins
Operating Temperature Min-40°C
Operating Temperature Max85°C
Product Range-
Qualification-
Automotive Qualification Standard-
SVHCNo SVHC (21-Jan-2025)
Product Overview
FT232RNL-REEL is a USB full-speed to serial UART IC, includes oscillator and EEPROM. The FT232RNL device is added to FTDI’s range of USB UART interface Integrated Circuit Devices. The FT232RNL is a USB to serial UART interface with optional clock generator output, and the new FTDIChip-ID™ security dongle feature. In addition, asynchronous and synchronous bit bang interface modes are available. USB to serial designs using the FT232RNL have been further simplified by fully integrating the external EEPROM, clock circuit and USB resistors onto the device.
- Single chip USB to asynchronous serial data transfer interface
- Entire USB protocol handled on the chip- no USB-specific firmware programming required
- UART with 4 GPIO pins and full speed (12Mbps) USB speed
- Fully assisted hardware or X-on / X-off software handshaking
- Data transfer rates of 3MBaud
- In-built support for event characters and line break condition
- New USB FTDIChip-ID™ feature and new configurable CBUS I/O pins
- Transmit and receive LED drive signals, adjustable receive buffer timeout
- 1.8V to 5V I/O voltage
- 28 Pin SSOP package, extended operating temperature range from -40°C to 85°C
Technical Specifications
Bridge Type
USB to UART
Interface Case Style
SSOP
IC Case / Package
SSOP
Operating Temperature Min
-40°C
Product Range
-
Automotive Qualification Standard
-
Supply Voltage Min
3.3V
Supply Voltage Max
5.25V
No. of Pins
28Pins
Operating Temperature Max
85°C
Qualification
-
SVHC
No SVHC (21-Jan-2025)
Technical Docs (1)
Legislation and Environmental
US ECCN:EAR99
EU ECCN:Unknown
RoHS Compliant:Yes
RoHS
RoHS Phthalates Compliant:Yes
RoHS
SVHC:No SVHC (21-Jan-2025)
Download Product Compliance Certificate
Product Compliance Certificate