ICM7218BIPI+

The ICM7218BIPI+ is an 8 digital LED display driver in 28 pin DIP package. This display driver interfaces microprocessor to an 8-digit, 7 segment, numeric LED display. It includes two types of 7 segment decoders, multiplex scan circuitry, segment and digital drivers and an 8 x 8 static memory. It accepts data in a serial format and drive common cathode display. It can display data in either hexadecimal or code B format. It also features a No decode mode where each individual segment can be independently controlled. This is particularly useful in driving bar graphs. It is used in bar graph display and panel meters.

• Supply voltage range is 4V to 6V at power down mode
• Operating temperature range from -20°C to 85°C
• Improved 2nd source
• Fast access time of 200ns write pulse width
• Microprocessor compatible
• Digital and segment drivers on-chip
• Low power CMOS
• Digital leakage current of 100µA
• Display scan rate of 250Hz per digit
• Data hold time of 25ns

Notas

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party