MAX6969AUG+T

MAX6969AUG+T is a 16-port, 5.5V constant-current LED driver. The MAX6969 uses the industry-standard, shift-register plus-latch-type serial interface. The driver accepts data shifted into a 16-bit shift register using data input DIN and clock input CLK. Input data appears at the DOUT output 16 clock cycles later to allow cascading of multiple MAX6969s. The latch-enable input, LE, loads the 16 bits of shift register data into a 16-bit output latch to set which LEDs are on and which are off. Suitable for variable message signs, marquee displays, p point of-order signs, traffic signs, gaming features and architectural lighting applications.

• 3V to 5.5V logic supply
• 25Mb, industry-standard, 4-wire serial interface at 5V
• 16 constant-current LED outputs rated at 5.5V
• Up to 55mA continuous current per output
• Output current programmed by single resistor
• 3% current matching between outputs
• 6% current matching between ICs
• 24 pin TSSOP package
• Operating temperature range from -40°C to +125°C

Notas

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party