T050000

T050000 is a Braccio robot Tinkerkit. The TinkerKit Braccio is a fully operational robotic arm, controlled via Arduino. It can be assembled in several ways for multiple tasks, such as moving objects. Users can also attach a camera or solar panel. There are so many ways in which the Braccio can extend the reach of users' devices. It is recommended to power the board via the jack connection with a regulated 5V DC at 4000mA power supply provided in the box. There is an on-board voltage regulator for higher voltages that protects the Braccio shield.

• 80cm maximum operating distance range
• 52cm maximum height, 14cm base width
• 90mm gripper width, 40cm cable length
• Servo technical specifications: PWM analog control signal
• Dimension is 1.65×0.81×1.56inch
• Speed at 4.8V: 0.20sec/60°, dual bearing rotation support

Contenido

Plastic parts x 21, Screws x 63, Flat washer x 16, Hexagon nut x 7, Springs x 2, Servo motors (2 x SR 311, 4 x SR 431), Arduino compatible shield x 1, Power supply 5V (4A x 1), Phillips screwdriver x 1, Spiral cable protection wrap x 1.

Advertencias

It is recommended to power the board via the jack connection with a regulated 5V DC at 5000mA power supply provided in the box. There is an on-board voltage regulator for higher voltages that protect the Braccio shield.

Notas

Arduino board not included.