K110

DC/AC microprobe model K110 measures as low as 100μA AC or DC. This unit has proportional mV output for direct readings on DMMs. This high accuracy K110 is ideal for calibration of current loop process instruments (e.g., 4 to 20mA or 0 to 20mA). It has an ultra-compact size and non-contact clamp-on convenience. Outputs signal proportional to total current (DC + AC).

• K series small probes designed for high accuracy measuring low currents, double insulation
• Working voltage rating of 600Vrms, current range of 450mA (DC)/300mArms (AC)
• Low noise, simple plug-in operation, 5ft (1.5m) lead with two 4mm banana plug output termination
• Safety compliance of EN50082-1 class A, EN 50081-1, EN 61010-1 300V CAT II
• Designed for use with digital multimeters and oscilloscopes, accurate display of waveforms
• Red LED indicates momentary or continuous overload, green LED indicates power and battery condition
• Maximum conductor size of 0.18inch, polycarbonate (UL 94) material
• Output signal of 10mV/mA, accuracy of 0.5%R ± 150µA (DC), 0.8%R ± 200µA (AC)
• Frequency range of DC to 1.5kHz, output impedance of 200ohm, overload of ±4.7mA
• Dimensions is 4.4inch x 0.6inch x 1inch, operating temperature range from 14 to 131°F

Contents

DC/AC microprobe, 20 hours 9V alkaline battery.

Notes

No range or mode (AC/DC) switching required.