8-215570-0
IDC Connector, Board In Connector, 1.27 mm, 2 Row, 10 Contacts, Cable Mount, Through Hole Mount
Need more?
| Packaging Type | Quantity | Unit Price: | Total |
|---|---|---|---|
| Cut Tape | 1 | $2.400 | $2.40 |
| Total Price | $2.40 | ||
| Quantity | Price |
|---|---|
| 1+ | $2.400 |
| 10+ | $2.100 |
| 25+ | $2.040 |
| 50+ | $1.960 |
| 100+ | $1.890 |
| Quantity | Price |
|---|---|
| 250+ | $1.510 |
Product Information
Product Overview
The 8-215570-0 is a 10-position vertical shrouded paddle-board Wire-to-Board Pin Header with tin over nickel-plated phosphor bronze contacts and red GF polyester housing. The Micro-MaTch series connector supports through-hole termination method to PC board and Insulation Displacement Crimp (IDC) termination method to wire/cable. The Micro-MaTch connector family, with its contact spacing of 1.27mm, offers a variety of wire-to-board interconnections. The Micro-MaTch contact helps prevent fretting corrosion, the traditional failure mode in tin-plated connections. Relative movements caused by vibrations/thermal expansion between male and female contacts are absorbed by an additional positioning spring in the female part. By preventing movements on the contact spot, a gas tight connection can make the Micro-MaTch contact spring system fretting corrosion resistant.
- Kink PCB mount retention
- Polarization mating alignment
Applications
Audio, Wireless
Technical Specifications
Board In Connector
1.27mm
10Contacts
Phosphor Bronze
Micro-MaTch
-
2 Row
Cable Mount, Through Hole Mount
Tin Plated Contacts
No SVHC (04-Feb-2026)
Legislation and Environmental
RoHS
RoHS
Product Compliance Certificate