PIC24FJ1024GB610-I/PT

The PIC24FJ1024GB610-I/PT is a 16bit microcontroller with large, dual partition flash program memory and USB On-The-Go (OTG) in 100 pin TQFP package. The PIC24F 16bit microcontroller featuring large dual partition flash with live update capability. It has a modified harvard architecture, up to 16MIPS operation at 32MHz, 8MHz internal oscillator, 17bit x 17bit single-cycle hardware fractional/integer multiplier, 16bit x 16bit working register array, C compiler optimized instruction set architecture, full speed USB operation in device mode, high precision PLL for USB, Supports control, interrupt, isochronous and bulk transfers.

• Supply voltage range of 2V to 3.6V, on-chip voltage regulators (1.8V) for low power operation
• Programmable reference clock output, power-on reset (POR), brown-out reset (BOR)
• Power up timer (PWRT) and oscillator start-up timer (OST)
• Flexible watchdog timer (WDT) with its own RC oscillator for reliable operation
• Detects clock failure and switches to on-chip, low-power RC oscillator
• 1024K program bytes, 32K data bytes and 85 I/O pins
• Twenty four 10bit /12bit A/D (Ch)
• 3 comparators, CTMU, 5/2 16bit/32bit timer, 6/6 IC/OC/PWM and 3/4 MCCP/SCCP
• 3 I2C, 3 SPI, 4/2 UART w/IrDA, 4 CLC, EPMP/EPSP, RTCC and USB OTG
• Operating temperature range from -40°C to +85°C (industrial)
• Peripheral pin select (PPS)
• full-speed USB 2.0 Device/Host/OTG
• 6x capture/compare/PWM (CCP)
• 4x Single-output capture compare PWM module (SCCP)
• 3x multiple-output capture compare PWM module (MCCP)
• Five 16-bit timers
• Two 32-bit timers
• Programmable cyclic redundancy check (CRC)
• Dual boot flash write