W31-X2M1G-15

The W31-X2M1G-15 is a 15A toggle/push/pull actuator Thermal Circuit Breaker, calibration will continuously carry 100% of rating, may trip between 101% and 134% of rating at 25°C, must trip at 135% in one hour. Ten times rated current is resettable overload capacity, over 1500V RMS dielectric strength, endurance cycling is more than 6000 cycles at 100% of rating or 10000 mechanical cycles. Threaded bushing, 15/32 inch diameter with or without anti-rotation flats panel mounting, 250VAC/50VDC voltage rating. Screw terminals situated 90° to each other with #8-32 screws and washers installed and also two hex nuts or lock washer installed.

• Cannot be reset against overload
• Visible trip indicator band
• Screw termination
• Trip-free operation
• Single pole
• Silver color metal toggle round with amp rate marking on end toggle

Applications

Power Management