MAX19713ETN+

The MAX19713ETN+ is a 10bit, 45Msps, full duplex analogue front-end in 56 pin TQFN package. It is optimized for high dynamic performance and ultralow power, the device integrates a dual 10bit, 45Msps receive (Rx) ADC, dual 10bit, 45Msps transmit (Tx) DAC & three fast-settling 12bit aux-DAC channels for ancillary RF front-end control and a 10bit, 333Ksps housekeeping aux-ADC. The typical operating power in FD mode is 91.8mW at a 45MHz clock frequency. The Rx ADC feature 54dB SINAD and 72.2dBc SFDR at 5.5MHz input frequency with a 45MHz clock frequency and the Tx DAC feature 70.3dBc SFDR at fOUT = 2.2MHz and fCLK = 45MHz. The Rx ADC and Tx DAC can be disabled independently to optimize power management. It is used in WiMAX CPEs, 801.11a/b/g WLAN and VoIP terminals.

• Analogue supply voltage range is 2.7V to 3.3V, digital I/O supply of 1.8V to 3.3V
• Operating temperature range from -40°C to 85°C
• Ultra low power, 91.8mW at fCLK = 45MHz, FD mode and 79.2mW at fCLK = 45MHz, Slow Rx mode
• 49.5mW at fCLK = 45MHz, slow Tx mode, low current standby and shutdown modes
• Programmable Tx DAC common-mode DC level and I/Q offset trim
• Excellent dynamic performance, SNR = 54.1dB at fIN = 5.5MHz (Rx ADC)
• Three 12bit, 1μs Aux-DACs, SFDR = 70.3dBc at fOUT = 2.2MHz (Tx DAC)
• Excellent gain/phase match, ±0.03° phase, ±0.02dB Gain (Rx ADC) at fIN = 5.5MHz
• Multiplexed parallel digital I/O, serial interface control
• Versatile power-control, shutdown, standby, idle, Tx/Rx disable

Notas

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party