
| Fabricante | ANALOG DEVICES |
|---|---|
| No. Parte Fabricante | MAX367CWN+Copiar |
| Tiempo de entrega estándar del fabricante | 10 semanas |
| No. Parte Newark | 73Y3735 |
| Su número de pieza | |
| Hoja de datos técnicos |
¿Necesita más?
| Cantidad | Precio en USD |
|---|---|
| 1+ | $13.650 |
| 10+ | $11.990 |
| 25+ | $10.330 |
| 50+ | $8.670 |
| 100+ | $8.150 |
| 250+ | $7.880 |
Información del producto
| Fabricante | ANALOG DEVICES |
|---|---|
| No. Parte Fabricante | MAX367CWN+Copiar |
| Tiempo de entrega estándar del fabricante | 10 semanas |
| No. Parte Newark | 73Y3735 |
| Hoja de datos técnicos | |
| Función del IC | Integrated Circuit Protector |
| Tensión de Alimentación Mín. | 4.5 |
| Tensión de Alimentación Máx. | 36 |
| Formato IC | WSOIC |
| No. de Pines | 18Pines |
| Temperatura de Trabajo Mín. | 0 |
| Temperatura de Trabajo Máx. | 70 |
| Rango de Producto | - |
| Norma de Cualificación Automotriz | - |
| Nivel de Sensibilidad a la Humedad (MSL) | MSL 1 - Unlimited |
| Sustancia Extremadamente Preocupante (SVHC) | No SVHC (04-Feb-2026) |
Resumen del producto
The MAX367CWN+ is a signal line circuit protector in 18 pin WSOIC package. It is a two-terminal circuit protectors, each circuit consists of two N-channel FETs and one P-channel FET. Each two terminal device guards sensitive circuit components against voltages near and beyond the normal supply voltages. It is used at interfaces where sensitive circuits are connected to external world and could encounter damaging voltages (up to 35V beyond the supply rails) during power-up, power-down or fault conditions. They can protect analogue signals using either unipolar (4.5V to 36V) or bipolar (±2.25V to ±18V) power supplies. Device is voltage sensitive MOSFET transistor arrays which normally on when power is applied and normally open circuit when power is off. With ±10V supplies, on-resistance is 100 ohm max and leakage is less than 1nA at +25°C. It is used in process control systems, hot insertion boards/systems, data-acquisition systems, redundant/backup systems and ATE eq
- 44V maximum supply voltage rating
- Operating temperature range from 0°C to 70°C
- Contains eight independent protectors
- Each protector is symmetrical
- ±40V overvoltage protection
- Automatic protection, no programming or controls
- Signal path resistance match is 7ohm(max) at TA = +25°C
Notas
ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party
Especificaciones técnicas
| Función del IC | Integrated Circuit Protector |
|---|---|
| Tensión de Alimentación Máx. | 36 |
| No. de Pines | 18Pines |
| Temperatura de Trabajo Máx. | 70 |
| Norma de Cualificación Automotriz | - |
| Sustancia Extremadamente Preocupante (SVHC) | No SVHC (04-Feb-2026) |
| Tensión de Alimentación Mín. | 4.5 |
|---|---|
| Formato IC | WSOIC |
| Temperatura de Trabajo Mín. | 0 |
| Rango de Producto | - |
| Nivel de Sensibilidad a la Humedad (MSL) | MSL 1 - Unlimited |
Documentos técnicos (1)
Productos relacionados
5 productos encontrados
Legislación y medioambiente
| US ECCN: | Unknown |
|---|---|
| EU ECCN: | Unknown |
| Conforme a RoHS: | Sí RoHS |
| Cumplimiento de ftalatos con respecto a la restricción de sustancias peligrosas (RoHS): | Sí RoHS |
| Valor de sustancia extremadamente preocupante: | No SVHC (04-Feb-2026) |
| Descargue el certificado de cumplimiento del producto | Certificado de conformidad del producto |
