
| Fabricante | ANALOG DEVICES |
|---|---|
| No. Parte Fabricante | MAX4210DEUA+Copiar |
| Tiempo de entrega estándar del fabricante | 12 semanas |
| No. Parte Newark | 73Y3969 |
| Su número de pieza | |
| Hoja de datos técnicos |
¿Necesita más?
| Cantidad | Precio en USD |
|---|---|
| 1+ | $3.940 |
| 3000+ | $2.160 |
| 6000+ | $2.120 |
| 12000+ | $2.080 |
| 18000+ | $2.040 |
| 30000+ | $1.990 |
Información del producto
| Fabricante | ANALOG DEVICES |
|---|---|
| No. Parte Fabricante | MAX4210DEUA+Copiar |
| Tiempo de entrega estándar del fabricante | 12 semanas |
| No. Parte Newark | 73Y3969 |
| Hoja de datos técnicos | |
| Función del IC | Power and Current Monitor |
| Tensión de Alimentación Mín. | 2.7 |
| Tensión de Alimentación Máx. | 5.5 |
| Formato IC | µMAX |
| No. de Pines | 8Pines |
| Temperatura de Trabajo Mín. | -40 |
| Temperatura de Trabajo Máx. | 85 |
| Rango de Producto | - |
| Norma de Cualificación Automotriz | - |
| Nivel de Sensibilidad a la Humedad (MSL) | MSL 1 - Unlimited |
| Sustancia Extremadamente Preocupante (SVHC) | No SVHC (04-Feb-2026) |
Resumen del producto
The MAX4210DEUA+ is a low cost, low power high side power and current monitor in 8 pin µMAX package. This real time power and current monitor device provides an analogue output voltage proportional to power consumed by load by multiplying load current and source voltage. The MAX4210 measures load current by using a high side current sense amplifier which makes this device for use in battery powered systems by not interfering with ground path of load. The device is a small, simple 6 pin power monitor intended for limited board space applications. It uses an external resistor divider network for greater design flexibility. The MAX4210 is typically used in overpower circuit breakers, smart battery packs/chargers, smart peripheral control, short circuit protection, power supply displays measurement, instrumentation, baseband analogue multipliers, VGA circuits and power level detectors.
- Supply voltage range from 2.7V to 5.5V
- Operating temperature range from -40°C to 85°C
- Power sense amplifier gain of 16.67V/V ((VPOUT/(VSENSE x VIN))
- Maximum POUT gain accuracy of ±1.5% at TA = +25°C (VSENSE = 10mV to 100mV, VIN = 1V)
- 150mV current sense full scale voltage
- IOUT power supply rejection of 80dB & POUT power supply rejection of 70dB at VCC = 2.7V to 5.5V
- Input source voltage range from +4V to +28V
- Low supply current of 380μA at VCC = +5.5V TA = +25°C
- IOUT -3dB bandwidth of 220KHz and POUT -3dB bandwidth of 500KHz
- Input bias current of 3μA at VSENSE = 0mV and POUT common mode rejection of 80dB
Notas
ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party
Especificaciones técnicas
| Función del IC | Power and Current Monitor |
|---|---|
| Tensión de Alimentación Máx. | 5.5 |
| No. de Pines | 8Pines |
| Temperatura de Trabajo Máx. | 85 |
| Norma de Cualificación Automotriz | - |
| Sustancia Extremadamente Preocupante (SVHC) | No SVHC (04-Feb-2026) |
| Tensión de Alimentación Mín. | 2.7 |
|---|---|
| Formato IC | µMAX |
| Temperatura de Trabajo Mín. | -40 |
| Rango de Producto | - |
| Nivel de Sensibilidad a la Humedad (MSL) | MSL 1 - Unlimited |
Documentos técnicos (1)
Productos relacionados
1 producto (s) encontrado (s)
Legislación y medioambiente
| US ECCN: | Unknown |
|---|---|
| EU ECCN: | Unknown |
| Conforme a RoHS: | Sí RoHS |
| Cumplimiento de ftalatos con respecto a la restricción de sustancias peligrosas (RoHS): | Sí RoHS |
| Valor de sustancia extremadamente preocupante: | No SVHC (04-Feb-2026) |
| Descargue el certificado de cumplimiento del producto | Certificado de conformidad del producto |
