AH1751-WG-7-A
Interruptor (Switch) de Efecto Hall, Bipolar Hall Effect Latch, 3.5 V, 20 V
¿Necesita más?
| Tipo de paquete | Cantidad | Precio unitario: | Total (Dólares USD) |
|---|---|---|---|
| Cinta adhesiva | 5 | $0.257 | $1.29 |
| Total (Dólares USD) Precio en USD | $1.29 | ||
| Cantidad | Precio en USD |
|---|---|
| 5+ | $0.257 |
| 50+ | $0.188 |
| 100+ | $0.178 |
| 250+ | $0.166 |
| 500+ | $0.155 |
| 1000+ | $0.146 |
| 2500+ | $0.144 |
| 5000+ | $0.143 |
Información del producto
Resumen del producto
AH1751-WG-7-A is a single-digital-output hall-effect latch sensor for high-temperature operation. This device includes an on-chip hall voltage generator for magnetic sensing, an amplifier to amplify hall voltage, and a comparator to provide switching hysteresis for noise rejection, an open-collector output pre-driver. An internal band-gap regulator provides a temperature-compensated supply voltage for internal circuits and allows a wide operating supply range. It is used in applications such as rotor position sensing, current switches, encoders, and RPM detection.
- Bipolar hall-effect latch sensor
- Operating voltage range from 3.5V to 20VDC
- Open collector pre-driver
- 50mA output sink current
- Chip power reverse-connection protection
- Supply current is 3.5mA typical at (VCC = 12V, OUT ”OFF”)
- Output saturation voltage is 200mV typical at (VCC = 12V, OUT ”ON”, IO = 50mA)
- Operating temperature range from -40°C to +125°C
Especificaciones técnicas
Bipolar
-
-
SC-59
SC-59
Digital
Colector Abierto
125
-
No SVHC (25-Jun-2025)
Bipolar Hall Effect Latch
-
3.5
20
3 Pin
1Salidas
-40
-
MSL 1 - Unlimited
Documentos técnicos (1)
Legislación y medioambiente
RoHS
RoHS
Certificado de conformidad del producto