S701E15N3S

The S701E15N3S is a Soft Start Controller designed to control acceleration and deceleration of three-phase motors. The S701 provides the user with the ability to adjust initial torque, ramp up and down time and also select kick start for high inertial loads. It is specifically designed for soft starting small (15Hp and down) three-phase motors. The S701 unit controls current on two of three motor phases to control the torque being applied to the motor, allowing for smooth starting of a motor. It is designed to be used with a manual motor starter or a full voltage starter. It provides the necessary overload protection for the motor and also provides line isolation for the motor. The short-circuit protection can be provided by fuses or circuit breakers. It supports 380 to 480VAC line voltage and 15A current rating. This 3-pole has standard control.

• Reduced wear on belts, gears, chains, clutches, shafts and bearings
• Allows for controlling the inrush current to the motor
• Reduced water-hammer in pumping applications
• Less shock to product on conveyor lines and material handling gear
• Kick start feature
• Unlimited number of start/stop operations per hour
• IP20 Finger protection
• 0 to 85% Adjustable initial torque control

Applications

Industrial