DS1090U-1+

The DS1090U-1+ is a low-frequency, spread-spectrum EconOscillator in 8 pin µMAX package. It is a low cost, dithered oscillator intended to be used as an external clock for switched-mode power supplies and other low-frequency applications. The dithering or sweeping function reduces peak-radiated emissions from the power supply at its fundamental frequency as well as harmonic frequencies. The device consists of four basic circuit blocks such as resistor-programmed master oscillator, factory-programmed clock prescaler, a pin-programmed dither circuit and the voltage-bias circuit that provides the feedback path to the master oscillator for frequency control and dithering functions. The DS1090 to be used in applications where a spread-spectrum clock is desired to reduce radiated emissions. A combination of factory-set prescalers and external resistor allows for output frequencies ranging from 4MHz to 8MHz. Both dither frequency and dither percentage are set using control pins.

• Supply voltage range is 3V to 5.5V
• Operating temperature range from -40°C to 85°C
• Simple user programming
• Dither percentage programmable from 0% to 8%
• Dither rate programmable (fMOSC/512, 1024, 2048 or 4096)
• CMOS/TTL compatible output
• Prescaler divides the frequency of master oscillator by 1

Notas

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party