KIT34674EPEVBE

The KIT34674EPEVBE is an evaluation module for MC34674, a fully integrated single cell Li-Ion and Li-polymer battery charger optimized for travel charger applications. The few external components required include a dual Colour LED for charge status indication, a negative temperature coefficient thermistor circuit for setting the charge temperature window, and two decoupling capacitors. The MC34674 tolerates an input voltage up to 28V, which allows low cost ac/dc converters to be used for further system cost reduction. A charge cycle of the MC34674 includes trickle, constant current and constant voltage charge modes. The constant current mode current is selectable from 50mA to 1.05A, with 10% accuracy and the constant output voltage in the constant voltage mode is fixed at 4.2V. The MC34674 has many features such as trickle charging for a deeply discharged battery, an internal timer for termination to prevent charging a failed battery.

• No external MOSFET, reverse blocking diode or current sense resistor are required
• 28V maximum input voltage rating with 11V over voltage protection threshold
• Factory programmable charge current
• Trickle charge for fully discharged batteries
• ±0.4% voltage accuracy over -20 to 70°C
• Driving a dual colour LED and smart battery connection verification optimized for travel charger
• Interface to NTC thermistor

Contenido

Assembled and tested evaluation board/module in anti-static bag, CD-ROM.