Ha introducido un valor en los campos resaltados a continuación que contiene caracteres no válidos. Revise su selección utilizando sólo caracteres válidos.
Es posible que el producto no corresponda exactamente con su búsqueda
Ya compró este producto antes.
Ver en Historial de pedidos
NCP1083QBCGEVB
Tarjeta de Evaluación, Convertidor CD-CD, POE, Módulo POE-PD, Rango de Potencia Extendido hasta 40W
La imagen solo tiene fines ilustrativos. Consulte la descripción del producto.
- Fabricante:
- ONSEMI ONSEMI
- No. Parte Fabricante:
- NCP1083QBCGEVB
- No. Parte Newark
- 73R4609
- Hoja de datos técnicos:
- NCP1083QBCGEVB Datasheet
Resumen del producto
The NCP1083QBCGEVB is an evaluation board evaluating the NCP1083 high power HIPO Power over Ethernet powered device (PoE PD). The NCP1083 represents a robust, flexible and highly integrated solution targeting demanding medium and high power Ethernet applications. It combines in a single unit an enhanced PoE-PD interface supporting the IEEE 802.3af and the upcoming draft IEEE 802.3at (D3.0) standard and a flexible and configurable DC to DC converter controller. The NCP1083's exceptional capabilities enable applications to smoothly transition from non-PoE to PoE enabled networks by also supporting power from auxiliary sources such as AC power adapters and battery supplies, eliminating the need for a second switching power supply. The NCP1083QBCGEVB implements a PoE module that converts the power from the Ethernet cable to a lower voltage and also supports getting its power from and auxiliary input, in case PoE network is not available.
- Auxiliary supply support with an I/P down to 9V in combination with an extended power up to 40W
- Improved robustness behaviour against cable ESD
- A programmable operational current limit up to 1100mA for extended power ranges up to 40W
- Eliminates the need for a second DC to DC converter to support traditional non PoE power sources
- Supports the IEEE802.3at and proprietary high power solutions beyond the standard up to 40W
- Protects the device against cable transients and hot swap events that can occur in harsh environment
Aplicaciones
Administración de Potencia, Electrónica de Consumo, Inalámbrico, Industrial, Comunicaciones y Red, Seguridad
Advertencias
The I/P voltage for the board should never exceed 57V nor should the evaluation board be loaded with loads higher than the 30W. Exceeding the specified I/P and O/P values could damage the board.
Información del producto
¿Quieres ver productos similares? Selecciona tus atributos requeridos a continuación y haz clic en el botón ×
- :
- On Semiconductor
- :
- NCP1083
- :
- Power Management
- :
- Módulo POE-PD
- :
- Tarjeta de evaluación NCP1083
- :
- -
Documentos técnicos (2)
Descarga de CAD
--Seleccione...
✔
--Seleccione...
×
Términos y condiciones
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
0 En stock
No cancelable / No retornable
Debido a las condiciones del mercado, los tiempos de entrega son únicamente orientativos y pueden estar sujetos a cambios con poco tiempo de aviso.
El precio no está disponible. Por favor Contáctese con Servicio al cliente.
- Precio para:
Múltiple: 1 Mínimo: 1
| Cantidad | Precio en USD | Su Precio en USD |
|---|---|---|
El precio no está disponible. Por favor Contáctese con Servicio al cliente.
Herramienta de filtro