MAX1480BCPI+

MAX1480BCPI+ is a complete, electrically isolated, RS-485/RS-422 data-communications interface solution in a hybrid microcircuit. Transceivers, optocouplers, and a transformers provide a complete interface in a standard DIP package. A single +5V supply on the logic side powers both sides of the interface. It features reduced slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, allowing error-free data transmission at data rates up to 250kbps. Drivers are short-circuit current limited and protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high impedance state. Applications include isolated RS-485/RS-422 data interface, transceivers for EMI-sensitive applications, industrial-control local area networks, automatic test equipment, HVAC/building control networks.

• Half duplex, slew rate limited, 35µs driver enable time
• Switch frequency is 535kHz typical at VFS=0V, VCC=5V ±10%, VFS=VCC, TA=TMIN to TMAX
• Operating supply current is 35mA at RL=∞, +25°C only, DE=VCC or open
• Shutdown supply current is 0.2µA at SD=VCC
• Isolation resistance is 10000Mohm at TA=+25°C, VISO=50V DC
• Driver input to output propagation delay is 2µs at RDIFF=54ohm, CL1=CL2=100pF
• Driver output skew is 900ns at RDIFF=54ohm, CL1=CL2=100pF
• 28 wide plastic DIP package
• 0°C to +70°C temperature rating

Notas

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party