MAX110ACWE+

The MAX110ACWE+ is a low cost, 2-channel, ±14bit serial ADC in 16 pin WSOIC package. The analogue to digital converter (ADC) uses an internal auto-calibration technique to achieve 14bit resolution plus over range with no external components. Operating supply current is only 550μA and reduces to 4μA in power-down mode making this ADC ideal for high resolution battery powered or remote sensing applications. A fast serial interface simplifies signal routing and opto-isolation saves microcontroller pins and offers compatibility with SPI, QSPI and MICROWIRE. The MAX110 operates with ±5V supplies and converts differential analogue signals in the -3V to +3V range. Internal calibration allows for both offset and gain-error correction under microprocessor (μP) control. Typical applications include process control, weigh scales, panel meters, data acquisition systems and temperature measurement.

• Positive supply voltage range from 4.75V to 5.25V
• Operating temperature range from 0°C to 70°C
• Two differential input channels
• 50Hz/60Hz rejection and up to 50conversions/sec
• 14bit resolution plus sign and over range
• INL of ±0.03% (-VREF ≤ VIN ≤ VREF), DNL of ±2LSB
• Common mode rejection ratio of 6ppm/V at -2.5V ≤ (VIN+ = VIN-) ≤ 2.5V
• Offset error of ±4mV (VIN+ = VIN- = 0V), full scale error of ±0.1% (after gain calibration)
• Power supply rejection of 15ppm at VSS = -5V, VDD = 4.75V to 5.25V

Notas

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party