Ha introducido un valor en los campos resaltados a continuación que contiene caracteres no válidos. Revise su selección utilizando sólo caracteres válidos.
Es posible que el producto no corresponda exactamente con su búsqueda
Ya compró este producto antes.
Ver en Historial de pedidos
MAX6126A21+
Referencia de Voltaje en Serie - Fija, 2.048V de Referencia, ± 2ppm/°C, µMax-8
La imagen solo tiene fines ilustrativos. Consulte la descripción del producto.
- No. Parte Fabricante:
- MAX6126A21+
- No. Parte Newark
- 73Y5214
- Rango de productos
- Serie MAX6126
- Hoja de datos técnicos:
- MAX6126A21+ Datasheet
Selector de rango de producto (Serie MAX6126)
Ver todo de este rango de productosResumen del producto
The MAX6126A21+ is a high precision, ultra low noise, low dropout, series voltage reference in 8 pin µMax package. This voltage reference features curvature correction circuitry, high stability and laser trimmed thin film resistors that result in 2ppm/°C temperature coefficients and an excellent ±0.06% (maximum) initial accuracy. The low noise reference architecture produces a low flicker noise of 1.3µVP-P and wideband noise as low as 60nV/√Hz without increased supply current usually found in low noise references. The wideband noise is improved to 35nV/√Hz and AC power supply rejection is also improved by adding 0.1µF capacitor at noise reduction pin. The load regulation specifications are less than 0.025ohm for sink and source currents up to 10mA. The MAX6126A21+ offers supply current that is virtually independent of supply voltage and does not require an external resistor.
- Supply voltage range from 2.7V to 12.6V
- Automotive temperature range from -40°C to 125°C
- Output voltage is 2.048V
- Maximum low dropout voltage is 200mV
- Quiescent supply current is 380µA at 25°C
- Stable with capacitive load stability range (Cload) from 0.1µF to 10µF
- Low long term stability of 100ppm
- 1000hr
- Maximum line regulation is 20µV
- V at 25°C
- Maximum load regulation is 25µV
- mA at 10mA source and sink current
- Force and sense outputs for remote sensing
- Automated Test Equipment (ATE); Digital Voltmeters; High-Accuracy Industrial and Process Control;
- High-Accuracy Reference Standard; High-Resolution A
- D and D
- A Converters; Precision Current Sources
Aplicaciones
Administración de Potencia
Información del producto
¿Quieres ver productos similares? Selecciona tus atributos requeridos a continuación y haz clic en el botón ×
- :
- Serie - Ajustable
- :
- Serie MAX6126
- :
- 2.048V
- :
- 0.06%
- :
- ± 2ppm/°C
- :
- µMax
- :
- 8Pines
- :
- -40°C
- :
- 125°C
- :
- Individual
- :
- -
- :
- MSL 1 - Unlimited
Documentos técnicos (2)
Descarga de CAD
--Seleccione...
✔
--Seleccione...
×
Términos y condiciones
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
5 En stock
Envío el mismo día
×
Haga el pedido antes de las 8 p.m., hora estándar del este, para un envío normal
Lunes a viernes, excluidos feriados nacionales
Para ordenar más que el inventario indicado, comuníquese con el departamento de ventas
Disponible en la cantidad indicada
$6.64
El precio no está disponible. Por favor Contáctese con Servicio al cliente.
- Precio para:
Múltiple: 1 Mínimo: 1
El precio no está disponible. Por favor Contáctese con Servicio al cliente.
Precio total:
Precio total: ( )
Precio total: --
Herramienta de filtro
