ATTINY4-TSHR

The ATTINY4-TSHR is a 8-bit low-power CMOS Microcontroller based on the AVR® enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATtiny4/5/9/10 achieves throughputs close to 1 MIPS per MHz. This empowers system designer to optimize the device for power consumption versus processing speed. The high-performance low-power AVR RISC-based microcontroller combines 512 bytes ISP flash memory, 32B SRAM, 4 general purpose I/O lines, 16 general purpose working registers, a 16-bit timer/counter with two PWM channels, internal and external interrupts, programmable watchdog timer with internal oscillator, an internal calibrated oscillator and 4 software selectable power saving modes. The device operates between 1.8 to 5.5V.

• Advanced RISC architecture - 54 Powerful instructions and most single clock cycle execution
• Flash write/erase cycles of 10000
• QTouch® library support for capacitive touch sensing (1 channel)
• One 16-bit timer/counter with prescaler and two PWM channels
• Programmable watchdog timer with separate on-chip oscillator
• On-chip analog comparator
• External and internal interrupt sources
• Low power idle, ADC noise reduction and power-down modes
• Enhanced power-on reset circuit
• Programmable supply voltage level monitor with interrupt and reset
• Internal calibrated oscillator
• Industrial and extended temperature ranges

Advertencias

ESD sensitive device, take proper precaution while handling the device.