¿Necesita más?
Cantidad | Precio en USD |
---|---|
1+ | $0.125 |
10+ | $0.125 |
25+ | $0.125 |
50+ | $0.125 |
100+ | $0.125 |
250+ | $0.125 |
500+ | $0.125 |
1000+ | $0.125 |
Información del producto
Resumen del producto
74LV4051PW,118 is a 8-channel analog multiplexer/demultiplexer with three digital select inputs (S0 to S2), an active-LOW enable input (active-low E), eight independent inputs/outputs (Y0 to Y7) and a common input/output (Z). It is a low-voltage Si-gate CMOS device that is pin and function compatible with 74HC4051 and 74HCT4051. With active-low E LOW, one of the eight switches is selected (low impedance ON-state) by S0 to S2. With active-low E HIGH, all switches are in the high-impedance OFF-state, independent of S0 to S2. VCC and GND are the supply voltage pins for the digital control inputs (S0 to S2, and active-low E). The VCC to GND ranges are 1V to 6V. The analog inputs/outputs (Y0 to Y7, and Z) can swing between VCC as a positive limit and VEE as a negative limit. VCC - VEE may not exceed 6.0 V. For operation as a digital multiplexer/demultiplexer, VEE is connected to GND (typically ground).
- Accepts TTL input levels between VCC = 2.7V and VCC = 3.6V
- Logic level translation: to enable 3V logic to communicate with ±3V analog signals
- Typical ‘break before make’ built in
- ESD protection: HBM JESD22-A114E exceeds 2000V, MM JESD22-A115-A exceeds 200V
- Input leakage current is 1μA maximum at (VCC = 3.6V, -40°C to +85°C)
- Supply current is 20μA maximum at (VCC = 3.6V, -40°C to +85°C)
- ON resistance (rail) is 225 ohm typical at (VCC = 1.2V; ISW = 100μA, -40°C to +85°C)
- Propagation delay is 25ns typical at (VCC = 1.2V, -40°C to +85°C)
- Operating temperature range from -40°C to +125°C
- TSSOP16 package
Especificaciones técnicas
Analogue Switch, Analogue Multiplexer/Demultiplexer
1V to 6V
TSSOP
8Canales
375
8:1
Surface Mount
125
-
No SVHC (21-Jan-2025)
Single Supply
1V to 6V
16Pines
55ohm
SP8T
-
-40
-
MSL 1 - Unlimited
Documentos técnicos (4)
Legislación y medioambiente
RoHS
RoHS
Certificado de conformidad del producto