Ha introducido un valor en los campos resaltados a continuación que contiene caracteres no válidos. Revise su selección utilizando sólo caracteres válidos.
Es posible que el producto no corresponda exactamente con su búsqueda
Ya compró este producto antes.
Ver en Historial de pedidos
RU-MLB2
Accessory Type:MIC/Line Bi-Directional Network Interface Dante
La imagen solo tiene fines ilustrativos. Consulte la descripción del producto.
- Fabricante:
- RADIO DESIGN LABS RADIO DESIGN LABS
- No. Parte Fabricante:
- RU-MLB2
- No. Parte Newark
- 84Y7514
Información del producto
¿Quieres ver productos similares? Selecciona tus atributos requeridos a continuación y haz clic en el botón ×
- :
- Interfaz Dante de Red Bi-Direccional MIC/Línea
- :
- Micrófonos, Equipo de Audio de Nivel de Línea
Documentos técnicos (0)
Descarga de CAD
--Seleccione...
✔
--Seleccione...
×
Términos y condiciones
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
Resumen del producto
The RU-MLB2 modules are Dante audio network interface products compatible with microphones and line-level audio equipment inputs and outputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations. The RU-MLB2 is a high quality converter that provides professional line-level outputs from two Dante network received audio channels. It also converts two professional or consumer line-level sources, or dynamic or condenser microphones to Dante network audio channels.
- Digital Audio Ethernet Protocol:Dante
- Transmission Rate: 100 Mbps
- Sample Rates Supported:44.1 kHz, 48 kHz (default), Bit Depth Supported:24 bits
- Audio Operating Levels:-18 dBFS = +4 dBu
- Mic/Line Inputs to Network Interface Section, Inputs (2):Balanced, detachable terminal block
- Gain:Automatic; 40 dB for condenser mics, 60 dB for dynamic mics
- Input Level for +4 dBu:56 dBu (dynamic), -36 dBu max; -36 dBu (condenser), -19 dBu max (unclipped), -14 dBu max (soft clipped), Input Impedance:> 1 kO
- Phantom Power:P48, 48 Vdc
- Standard for Phantom:IEC 61938: 2013
- Frequency Response:20 Hz to 20 kHz (± 0.5 dB)
- THD+N: 70 dB (50 to 120 Hz)
- Crosstalk: 20 kO
- Frequency Response:20 Hz to 20 kHz (± 0.5 dB)
- THD+N: 60 dB (50 Hz to 120 Hz)
- Crosstalk: 18 dB
- Network to Line Level Interface Section
- Outputs (2):Balanced, detachable terminal block, Output Level:+4 dBu (nominal), Output Impedance:150 O balanced; 75 O unbalanced
- Frequency Response:20 Hz to 20 kHz (± 0.5 dB)
- THD+N: 18 dB
- Selectors (2):MIC or LINE (rear panel)
- Indicators (9):Power In (1); Output Signal LEDs (2); Input Signal LEDs (2); Network Sys and Sync (2), Ethernet Link and Speed (2)
- Power Connections (2):Power Jack; Detachable Terminal Block
- Ambient Operating Environment:0° C to 40° C
- Power Requirement:24 Vdc @ 175 mA plus connected phantom loads.
- Dimensions:5.8" x 1.7" x 5.2", Weight:1.514 lbs.
0 En stock
No cancelable / No retornable
Debido a las condiciones del mercado, los tiempos de entrega son únicamente orientativos y pueden estar sujetos a cambios con poco tiempo de aviso.
$838.42
El precio no está disponible. Por favor Contáctese con Servicio al cliente.
- Precio para:
Múltiple: 1 Mínimo: 1
| Cantidad | Precio en USD | Su Precio en USD |
|---|---|---|
| 1+ | $838.42 |
Precio promocional
Precio de contrato
Precio exclusivo de la web
Precio de contrato exclusivo de la web
|
El precio no está disponible. Por favor Contáctese con Servicio al cliente.
Precio total:
Precio total: ( )
Precio total: --
Herramienta de filtro