NGU411

NGU411 is a single channel four-quadrant source measure unit. It provides up to 60W of output power and sink power, respectively. The channels are floating, galvanically isolated and protected against overload and short circuits. With five measurement ranges for current and a resolution of up to 6½ digits when measuring voltage, current and power, R&S®NGU source measure units are perfect for characterizing devices that work from extremely low power consumption to high currents in the ampere range. Using ammeters with feedback-amplifier technology increases accuracy and widens the sensitivity down to nA range. With an acquisition rate of up to 500000 samples/sec, even extremely fast variations in voltage/current can be captured. The instruments provide fast load recovery time of < 30µs combined with minimum overshoot even during a demanding load change. The linear design of the output stages allows R&S®NGU SMU to operate as a source and sink with minimum residual ripple and noise.

• Maximum output power is 20W
• Output voltage per channel range from -20V to +20V
• Output current per channel ≤ 10V: ±2A, > 10V: ±1A
• TFT 5" 800 × 480 pixel WVGA touch display
• High speed data acquisition (FastLog function)
• Overvoltage, overcurrent, overpower and overtemperature protection
• Operates in voltage priority and current priority mode, high-capacitance mode
• Mains nominal voltage 100V/115V/230V (±10%)
• operating temperature range +5°C to +40°C
• Dimension is W × H × D 8.74" × 3.81" × 17.16"