Ha introducido un valor en los campos resaltados a continuación que contiene caracteres no válidos. Revise su selección utilizando sólo caracteres válidos.

 
 
Low

RASPBRRY-MODB-512M - 

MODEL B - ASSEMBLED BOARD ONLY

RASPBRRY-MODB-512M - MODEL B - ASSEMBLED BOARD ONLY

La imagen solo tiene fines ilustrativos. Consulte la descripción del producto.

No. Parte Fabricante:
RASPBRRY-MODB-512M
No. Parte Newark
43W5302

Información del producto

:
Broadcom
:
BCM2xxx
:
ARM
:
ARM11
:
BCM2835
:
Tarjeta RPI MOD-B, Solo Tarjeta Armada
:
-
Encontrar productos similares Elija y modifique los atributos anteriores para encontrar productos similares.

Resumen del producto

La RASPBRRY-MODB-512M es una computadora del tamaño de una tarjeta de crédito que se conecta a la TV y un teclado, es como una pequeña PC que se puede utilizar para muchas de las cosas que hace la PC de escritorio, como hojas de cálculo, procesamiento de textos y juegos. También reproduce video de alta definición. El diseño se basa en un SoC Broadcom BCM2835, que incluye un procesador ARM1176JZF-S de 700 MHz, GPU VideoCore IV y 256 MB de RAM. El diseño no incluye un disco duro o unidad de estado sólido integrados; en su lugar depende de una tarjeta SD para arrancar y almacenamiento a largo plazo. Esta tarjeta se ha diseñado para ejecutar sistemas operativos basados en el kernel de Linux.
  • Procesador de aplicaciones multimedia full HD SoC Broadcom BCM2835
  • Procesador de aplicaciones de baja potencia ARM1176JZ-F de 700 MHz
  • Broadcom VideoCore IV, OpenGL ES 2.0, decodificador de alto perfil AVC 1080p30 h.264/MPEG-4
  • SDRAM de 512 MB
  • Red integrada RJ45 Ethernet 10/100
  • Almacenamiento mediante ranura para tarjeta SD/MMC/SDIO
  • Conector USB doble
  • RCA compuesto HDMI (rev 1.3 y 1.4 ) (PAL y NTSC)
  • Conector de 3.5 mm, HDMI
  • Sistema operativo Linux

Aplicaciones

Hobby y Educación, Imagen, Vídeo y Visión, Electrónica de Consumo, Industrial, Comunicaciones y Red

Búsquedas relacionadas

Ya no se fabrica

No longer stocked:: No Longer Manufactured:: true

Evaluaciones del cliente

RASPBERRY-PI - RASPBRRY-MODB-512M - MODEL B - ASSEMBLED BOARD ONLY 4.6 5 35 35
Pretty Solid The Raspberry Pi is a pretty solid little SOC (system on a chip) I use it on a variety of mini projects. April 29, 2015
Very versatile, but watch the Cap I have used the Raspberry-Pi for a variety of projects. I have had an issue that has been identified by a lot of others in accidentally breaking the capacitor on the power input. The unit still works without it, but it is also really easy to re-solder the cap back on. April 19, 2015
Great for the price. This is the one where I finally broke down and jumped into Linux head first. It's great for someone wanting to play around with a linux computer without much cost beyond and hdmi cable and a television. I've had a lot of fun with it and have mine set up with RetroPie and a controller and play all the old Nintendo games. It a blast and I can't recommend buying one of these and learning the basics for cheap. April 17, 2015
The awsome pi I used these for several projects and eventually upgraded my pi and retired the old one as my DHCP server as the router's built in server was no good. I can certify 100+ days of up time without a hitch. March 10, 2015
Retropie This board went into my Retropie pc, it's done a great job! February 28, 2015
  • 2015-06-11T15:22:49.674-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_35, tr_35
  • loc_en_US, sid_43W5302, prod, sort_default
2 3 4 5 ... 7 Next>>

Intercambio de preguntas y respuestas de los clientes

(There are 36 questions : 52 answers on this product)

Product Q&A

Ask your questions. Share your answers.

 
 
Browse Q&A
 
 
Search Questions
Need Product Support?
If you need immediate technical support use Live Support or Contact Us.
This space is yours...
Use this space to Ask your peers product questions or Answer those questions posted by them.
Ask a Question 
Sort by
2 3 4 Next>>
Details: 
Does the board come with an SD card slot or do I have to purchase that also. Other question, what is the right power supply to get, I noticed one of them has a micro usb, isnt there a regular power supply?
2 years, 5 months ago
by
rob75070
Answer this Question
0points
0out of 0found this question helpful.
Was this helpful?(0)(0)
Report Abuse

Answers

A: 
The Raspberry Pi does, indeed, come with an SD-Card reader. However, the SD reader is used to boot the device, so you will not be using it for anything else (e.g. Reading SD Cards). Raspberry.Org states that the power required is " 5 volts @ 1 amp. Not all USB power supplies provide this. It is critical to have the minimum 1 amp of power. Power is provided through a USB to micro-usb cable.
1 year, 11 months ago
by
ede2013
0points
0out of 0found this answer helpful.
Was this helpful?(0)(0)
Report Abuse
A: 
I use an apple iPhone charger which is 5V at 1 Amp. I power the Pi through a USB A male to a USB micro B male cable. This has worked very well for me but I have not tried to connect a USB hub. Presently using a 16GB no brand name SD card.
2 years, 4 months ago
by
Drake411
+3points
3out of 3found this answer helpful.
Was this helpful?(3)(0)
Report Abuse
A: 
Not to split hairs over the previous answer, but a MINI usb is different than a MICRO. Raspberry Pi does not have a MINI usb -- it's a Micro USB. Not flamin' ya -- just clarifying for anyone who might become misinformed.

I'm using an Android charger -- same plug as my old HTC phone and recent Blackberry. Old blackberry devices had a trapezoid "mini USB" connector, which is not the same as this one.
2 years, 5 months ago
by
Anonymous
+21points
21out of 21found this answer helpful.
Was this helpful?(21)(0)
Report Abuse
A: 
The board has an SD card slot on the backside, near the power port.
2 years, 5 months ago
by
Logan
+8points
8out of 8found this answer helpful.
Was this helpful?(8)(0)
Report Abuse
A: 
Yes, the RasPi has a built-in SD card slot. It gets its power through a mini-USB connector, so it can pick up its power from any USB power source. I'm using a simple little "wall wart" power cube with a standard USB connector, and a USB to mini-USB cable.
2 years, 5 months ago
by
rlsprouse
-6points
6out of 18found this answer helpful.
Was this helpful?(6)(12)
Report Abuse
 
Q: 
1 answer

Probable backorder delay

Details: 
Hi, I ordered one on October 26. I'm expecting a long delay, but can you give me an idea of about how long it might take to get one? Thanks.
2 years, 6 months ago
by
charlieb
Answer this Question
0points
0out of 0found this question helpful.
Was this helpful?(0)(0)
Report Abuse

Answers

A: 
Current standard lead time is 3 weeks.
2 years, 6 months ago
by
TechGTC
+10points
11out of 12found this answer helpful.
Was this helpful?(11)(1)
Report Abuse
Details: 
43W5302 is this a revision 2 raspberry pi board?
2 years, 6 months ago
by
lbcampos49
Answer this Question
0points
0out of 0found this question helpful.
Was this helpful?(0)(0)
Report Abuse

Answers

A: 
Yes, it's revision 2 Raspberry Pi board with 512MB RAM memory.
2 years, 6 months ago
by
TechGTC
+8points
8out of 8found this answer helpful.
Was this helpful?(8)(0)
Report Abuse
2 years, 6 months ago
by
JimBits
Answer this Question
0points
0out of 0found this question helpful.
Was this helpful?(0)(0)
Report Abuse

Answers

A: 
Yes, you will receive the Model B revision 2 Raspberry Pi board with 512MB RAM memory.
2 years, 6 months ago
by
TechGTC
+5points
6out of 7found this answer helpful.
Was this helpful?(6)(1)
Report Abuse
Details: 
I already purchased a case and the pre-programmed SD card. I also already have tons of mini USB cords will that work until he can buy a new one.
2 years, 5 months ago
by
hikira16
Answer this Question
0points
0out of 0found this question helpful.
Was this helpful?(0)(0)
Report Abuse

Answers

A: 
In addition to the items listed in the previous answer; also need an HDMI cable for use with a monitor or tv with and HDMI port.
1 year, 11 months ago
by
ede2013
0points
0out of 0found this answer helpful.
Was this helpful?(0)(0)
Report Abuse
A: 
You need power supply, Newark part # 27W9241. If looking for mouse and keyboard, suggest to go for Newark parts # 11M5544 and 11M4472. For WiFi support, go for Newark part 07W8938.
2 years, 5 months ago
by
TechGTC
+5points
5out of 5found this answer helpful.
Was this helpful?(5)(0)
Report Abuse
 
Q: 
2 answers

Re: item #83T1943

Details: 
Does this have 256MB or 512MB memory?
2 years, 7 months ago
by
midwaym
Answer this Question
0points
0out of 0found this question helpful.
Was this helpful?(0)(0)
Report Abuse

Answers

A: 
That part has the 512MB of memory as indicated by the 512M in the part description.
2 years, 5 months ago
by
Logan
+1point
1out of 1found this answer helpful.
Was this helpful?(1)(0)
Report Abuse
A: 
For Newark Order code 43W5302 with Manufacturer part # RASPBRRY-MODB-512M, the size of the RAM is 512MB. However the Newark order code 83T1943 is discontinued and it was with 256MB RAM.
2 years, 7 months ago
by
TechGTC
+3points
3out of 3found this answer helpful.
Was this helpful?(3)(0)
Report Abuse
Details: 
I want to attach a fan to my raspberry pi case.
2 years, 4 months ago
by
Anonymous
Answer this Question
0points
0out of 0found this question helpful.
Was this helpful?(0)(0)
Report Abuse

Answers

A: 
Any fan that fits in the case and is quiet. If running of the pi, you have to pay attention to voltage and current.
2 years, 4 months ago
by
Anonymous
+1point
1out of 1found this answer helpful.
Was this helpful?(1)(0)
Report Abuse
A: 
You can go for Newark part 96M8141 (5VDC fan, 20mm size).
2 years, 4 months ago
by
TechGTC
+2points
2out of 2found this answer helpful.
Was this helpful?(2)(0)
Report Abuse
Details: 
I want to buy the above MODB-512M as a birthday gift for 10 year old grandson who plays a lot with computers.

What other minimum accessories do I need to buy along with this so he can start using it? (without spending a lot of money. His interest may not sustain.)

No fancy add-ons.
2 years, 2 months ago
by
rsastry
Answer this Question
0points
0out of 0found this question helpful.
Was this helpful?(0)(0)
Report Abuse

Answers

A: 
Accessories that are required to run the board are:

1) Power supply for the board: #27W9241
2) SD card for OS booting: #96T7436
3) HDMI to HDMI (if HDMI monitor/display present with you): #96T7445
4) HDMI to VGA (if you don't have HDMI monitor/display and want to work on VGA port): #07W8937

optional required:
1) Enclosure for the board: #07W8936
2) Stereo audio cable: #18J5655 or #96T7442
3) standard Keyboard(if not present): #43W5953
4) WiFi module for wireless connectivity: #07W8938
2 years, 2 months ago
by
TechGTC
+3points
3out of 3found this answer helpful.
Was this helpful?(3)(0)
Report Abuse
Details: 
Need to know if the WiPi can be used with the original RP 256.
2 years, 6 months ago
by
MarioScenario
Answer this Question
0points
0out of 0found this question helpful.
Was this helpful?(0)(0)
Report Abuse

Answers

A: 
Thank you for the prompt answers. You guys rock!
2 years, 6 months ago
by
MarioScenario
-1point
0out of 1found this answer helpful.
Was this helpful?(0)(1)
Report Abuse
A: 
Yes, it will work with the 256MB Pi. This WLAN module is natively supported by the Raspbian “Wheezy” Linux operating system.
2 years, 6 months ago
by
TechGTC
+1point
1out of 1found this answer helpful.
Was this helpful?(1)(0)
Report Abuse
A: 
Yes, it's a purely software thing. Getting it running in the software in Linux will be the only task. And the distro's of Linux they have together for the Rasbo Pi may recognize it automatically. If not there are tutorials on the web.
2 years, 6 months ago
by
kk4eqm
+1point
1out of 1found this answer helpful.
Was this helpful?(1)(0)
Report Abuse
 
Q: 
2 answers

ON/OFF Power Switch.

Details: 
I don't like the idea of disconnect abruptly the usb power supply.
1 year, 11 months ago
by
andhy1272
Answer this Question
0points
0out of 0found this question helpful.
Was this helpful?(0)(0)
Report Abuse

Answers

A: 
You may plug it into a power bar and switch it off after issuing the command "sudo shutdown -h now".
1 year, 11 months ago
by
ede2013
+1point
1out of 1found this answer helpful.
Was this helpful?(1)(0)
Report Abuse
A: 
There are other simple methods of turning off the raspberry pi board which can be self implemented.
you can follow the Raspberry Pi forum with an excellent thread about a simple & safe shutdown button.

http://www.raspberrypi.org/phpBB3/viewtopic.php?p=186137
1 year, 11 months ago
by
TechGTC
+1point
1out of 1found this answer helpful.
Was this helpful?(1)(0)
Report Abuse
2 3 4 Next>>
  • 2015-06-11T15:20:41.570-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_43W5302, prod, sort_default
2 3 4 Next>>

Comunidad

¿Quiere ver más información de otros clientes sobre este producto?

 Lea debates, blogs y documentos de los miembros de nuestra comunidad.

Filtros:

Seleccione el tipo de documentos que quiere ver y haga clic en "Aplicar filtros"
Pregunte a uno de nuestros expertos o empiece un debate y reciba respuestas de los expertos de nuestros fabricantes y de otros ingenieros de la comunidad.