RPA60-2412SFW/P

The RPA60-2412SFW/P from Recom Power is a RPA60-FW series 60W single output DC to DC converter with positive control function. This high power density converter has 4:1 wide input voltage range and industry standard 2”x1” case size. Despite its small size, the RPA60-FW converter is fully specified device with high efficiency, no minimum load, 1600VDC isolation, tight regulation and low ripple/noise figures. The trimmable output is fully protected against overtemperature, short circuits, overcurrent and overvoltage. The converter finds many uses in railway applications where board space is at a premium. It has LC internal input filter.

• Input voltage range from 9VDC to 36VDC (24VDC nominal input voltage)
• Output voltage of 12VDC and output current of 5000mA
• Input current of 2695mA
• Efficiency of 92.8% and maximum capacitive load of 6000μF
• Maximum line regulation of ±0.2% (low line to high line)
• Load regulation of ±0.5%
• Start-up time of 60ms (power-up, CTRL ON/OFF) and internal operating frequency of 330KHz
• Ripple and noise of 100mVp-p and maximum output accuracy of ±1%
• Minimum isolation resistance of 10Mohm and typical isolation capacitance of 2200pF
• Maximum case temperature of 105°C

Applications

Power Management, Industrial

Notes

An input fuse is required if the mains supply is not overcurrent protected. Recommended fuse is 10A slow blow type.